BAUMR-AG 650W Electric Tile Saw Cutter with 180mm (7") Blade
- 650W / 3000RPM
- 178mm (7") ∅
We all know there's nothing quite like the satisfaction of doing a job well yourself—and with a Baumr-AG BTS80 Table Top Tile Saw as your work mate you can skip the hassle of lining up overpriced quotes from tradies. You’ll knock over the job yourself with minimum fuss thanks to its powerful 650W copper rotor motor and feature-packed design!
The wet cutting system is uncomplicated and highly-effective. Simply pull out the tray and fill it with water. The blade runs through the reservoir ensuring that it cuts with reduced friction, yielding cleaner results and with minimal dust. The blade itself is covered by a guard that can be adjusted for working with tiles of varying depths of up to 46mm.
The Baumr-AG Table Tile Cutter features an ultra-tough reinforced nylon base and can accommodate almost most typical tile sizes. The rip fence meets up to two measurement scales for accurate positioning. The fence can also be detached for positioning on either side of the blade for working with different tile widths. The generous table size allows you to rip cut tiles up to a 300mm in width, and to unlimited length!
You can adjust the table tilt in seconds in order add bevelled edges to tiles of up to 30mm deep. There is also an on-board mitre square enabling you to easily repeat perfect diagonal cuts. The high-performance Diamond Blade is ideal for most ceramic and porcelain tiles. A high-performance aftermarket blade will provide optimal cutting results and enable working with dense materials like marble and granite.
This great value table tile saw packs all this into a compact and highly-portable design. Take the smart route and save yourself time and big dollars on your next tiling project!
Buy Smarter, Buy Baumr-AG!
- Powerful 650W copper rotor motor
- Easy-fill wet cutting system
- Adjustable blade guard
- Stainless steel deck
- Adjustable rip fence with 2 measurement scales
- On-board mitre square for repeatable cuts
- Add bevel edges to tiles
- Highly portable design with handle
- Ultra-tough reinforced nylon base
OTHER SPECIFICATIONS:
Bevel Edge Angles: 22.5 degrees, 45 degrees
Deck Size: 345 x 345mm
Please Note: Performing angled bevel cuts can be arduous, if you choose to perform such cuts please ensure that you are qualified to do so before operating the machine. Please also be aware of any adjustable parts of the machine that may be in the cutting line when performing an angled cut that is otherwise not in the way when in normal operation. It is recommended to guide the circular saw blade along the full range of the cutting table before activating its power to ensure no object is obstructing an angled cut. The supplied blade may not be suitable for all applications, refer to a tile supplier for the recommended blade.
General Delivery Information
Our products are dispatched within 1 business day. Please ensure your address is correct during checkout, as our system cannot accept order cancellations following payment to expedite delivery. Delivery typically takes 5-10 business days. Depending on the size and weight of your item, it will be sent via courier or Australia Post. Please refer to the individual product page for specific delivery methods.
Note: PO Boxes cannot receive items above 25kg or longer than one metre.
Buyers are fully responsible for providing the correct delivery address and mobile phone number at checkout. Address changes after checkout are not valid.
Free Shipping
We offer free shipping on some of our items to metro areas. Check shipping rates in checkout.
Australia Post Deliveries
If your goods are sent through Australia Post, you may receive a knock on the door or a card in your letterbox indicating your item is available for pickup from your local post office. A signature is required for collection.
A re-delivery fee will be charged for items returned due to an incorrect delivery address or failure to collect from the Post Office.
Courier Deliveries
Once your item reaches the nearest depot, the courier provider will contact the nominated receiver via email to provide delivery updates. Deliveries are made during normal business hours (9 am-5 pm) on weekdays. Delivery is not available on weekends, public holidays, or after business hours.
The courier may require your assistance unloading from the vehicle. Deliveries are made to the property entrance only. A re-delivery fee will be charged for items that are undeliverable and/or returned due to an incorrect delivery address or unsuccessful delivery attempts.
Special Delivery Conditions
We cannot guarantee door-to-door delivery for every customer. Buyers in remote areas such as farms, islands, mining camps, small towns, or other out-of-the-way locations may need to collect their items from the nearest freight depot.
General Returns
At Baumr-AG, our returns policy aligns with Australian Consumer Law, ensuring your statutory rights are upheld. If you encounter any issues with a product, you are entitled to return it. You are responsible for returning items.
Warranty Returns
Returns are accepted in accordance with our warranty conditions.
Faulty Items
To return a faulty item, please email us at support@baumr-ag.com.au with your order number. You may be asked to provide photos or videos of the item to facilitate the return process. Our Customer Service Department will issue a Return Authorisation (RMA) number and provide further instructions. Please do not send items back without obtaining an RMA number, as this may result in the item not being identifiable and accepted.
Once a return is authorised, it is the buyer’s responsibility to ensure the product is securely packaged to prevent damage during transit. Failure to do so may affect the resolution of your claim. The inspection process will be completed within 6 business days from the date the item is received by our service department.
Change of Mind Returns
We accept Change of Mind returns within 30 days of receiving the item. The item must be in re-saleable condition to qualify for a Change of Mind store credit. A handling/cancellation fee of 20% of the purchase price will apply. The refund amount will not include the original shipping costs.
For any further questions or assistance, please contact our support team.
- 1 x Baumr-AG BTS80 Wet Tile Saw
- Note: User Manual is accessible online. Not suitable for cutting Travertine
Download Manual
- Product Dimensions (W x L x H): 41 x 41 x 22cm
- Product Weight: 6kg
- Carton Dimensions (W x L x H): 46.5 x 52 x 23cm
- Carton Weight: 7kg
- Blade: 178mm (7") Diamond
- Model: BTS80
- Mpn: 9348948083695
- Power plug: 10A Australian Standard
- Power type: Corded Electric
- Powerful 650W copper rotor motor
- Easy-fill wet cutting system
- Adjustable blade guard
- Stainless steel deck
- Adjustable rip fence with 2 measurement scales
- On-board mitre square for repeatable cuts
- Add bevel edges to tiles
- Highly portable design with handle
- Ultra-tough reinforced nylon base
OTHER SPECIFICATIONS:
Bevel Edge Angles: 22.5 degrees, 45 degrees
Deck Size: 345 x 345mm
Please Note: Performing angled bevel cuts can be arduous, if you choose to perform such cuts please ensure that you are qualified to do so before operating the machine. Please also be aware of any adjustable parts of the machine that may be in the cutting line when performing an angled cut that is otherwise not in the way when in normal operation. It is recommended to guide the circular saw blade along the full range of the cutting table before activating its power to ensure no object is obstructing an angled cut. The supplied blade may not be suitable for all applications, refer to a tile supplier for the recommended blade.
